|
Altimeter
|
Altitude 1 (A1): Absolute altitude up to
17,000 feet (5,500 m). Resolution 3 feet (1m) over the entire
range of measurement. Display in feet or meters (user selectable) |
| |
Altitude 2 (A2): Relative or absolute altitude
up to 17,000 feet (5,500 m). Push button to zero A2 to display
relative gain or loss in altitude. Resolution 3 feet (1 m) over
the entire range of measurement. Display in feet or meters as
A1 |
| |
Pressure Corrected to mean sea level: This
feature is used to calibrate A1 (QNH) when the mean sea level
pressure is known. Range of adjustment: 950 - 1060 mbar/hPa. Display
in hPa or inches Hg (user selectable) |
|
Vario
|
Continuous analogue display: Patented multi-display
graphically shows lift and sink. Display range: ± 1,600
ft/min (± 8 m/s) with a resolution of 40 ft/min (0.2 m/s) |
|
|
Continuous digital display: Display range:
± 4000 ft/min (20m/s). Resolution: 20ft/min (0.1m/s) |
|
|
Averager: Affects the digital vario display.
Seven selectable average value calculations over 1, 5, 10, 15,
20, 25, 30, or 35 seconds (1 update per second). |
|
|
Acoustics: Higher tone for ascending and
lower tone (more depressing) for descending. Ascent tone volume
can be off, low or high. Descent tone volume can be off or the
same as the ascent tone volume.
Ascent acoustics: Ascent-dependent interval and pitch.
Descent acoustics: Descent-dependant pitch (continuous
tone). User selectable setting, below which the tone sounds. Adjustable
setting between -40 and -1600 ft/min in 40ft/min intervals (-0.2
and -8 m/s in 0.2 m/s intervals). |
|
Speed
|
Digital speed display: Airspeed displayed
in a separate window of the instrument when a speed sensor is
connected. Display units kmh, mph, or knots (user selectable).
Display range: 0 - 130 kmh. Adjustable stall alarm from 10-150
kmh. |
|
Temperature display
|
Ambient temperature: Integrated temperature
sensor. Display in Fahrenheit or Celsius (user selectable). Range
of measurement: -22°F to 158°F (-30°C to +70°C). Can be displayed
either continuously or alternating with the clock or the speed
display |
|
Time functions
|
Real Time Clock: Hours, minutes, day ,month,
and year (just like most clocks that I know). Date stamp on recorded
flights |
|
|
Stopwatch: Display up to 10 hours. Can be
operated at any time by pressing the start-stop-reset function
key |
|
|
Flight Time Clock: Display of flying time.
May be displayed during flight or for any recorded flight in MEMO
mode |
|
Flight Memory
|
Flight data: The 20 most recent flights
are automatically recorded. The following values are recorded:
Max altitude 1, max altitude 2, max ascent rate, max descent rate,
flight duration and date |
|
Option Modes
|
Run mode: (normal operation).
Set mode: (function adjustment); A1, A2, Chrono, Stall
speed, time, memo, basic averager, sink alarm.
Option mode: (function programming). Units for A1 and A2,
QNH, sensor correction. A2 relative or absolute. Units of speed,
speed correction. Temperature display, Units of temperature. Averager
interval, audio response level, units of vario. |
|
Power Supply
|
Two 1.5 volt AA cells (approx 150 hours operation).
Battery status is displayed during power-up (automatic low battery
warning). Data is stored for up to 10 years without batteries! |
|
Housing
|
Dimensions: 142 x 83 x 38 mm (5-1/2"
x 3-1/4" x 1-1/2")
Weight with batteries approx 240 grams (8 oz) |
|
Warranty
|
One year parts and labour. |
|
Supplied with
|
Manual (English, Italian, French & German),
warranty card, batteries and protective carrying case. |
Home
Blokarts
Varios
Flytec
4005
